Ropes, Fenders & Hooks

!

Rudder Bearing

flange-bearing-unit

  1.5"dia Flanged Cast Iron



 

Boat Hook Pole - Ash

8ft x 1.1/2" dia. 

Collection only, please collect from the shop or a nearby marina that we deliver to

Brass Boat Hook End

Solid Brass fitting to make an attractive boat hook.

Pointed end with hook on side. Fits 28mm (1 1/8") pole.

 

Fender Chain - Long Link

5mm dia metal. 


Sold by the metre.  If you want 3 metres please order 3 etc.


Choose galvanised or stainless steel.

Fenders - Side - Kart Tyre

These fenders are a good economical way of getting side fenders by recycling old Kart Tyres. They come in two sizes: narrow 5" wide and wide 8" wide, made from front and rear tyres respectively.

They come complete with stainless steel attachment ring and drain holes.

Fenders - Side - Tube or Pipe

These fenders protect the side of your boat and are either tubular (like a long balloon) or pipe (solid apart from a hole down the middle with rope through to a crown knot at the bottom)

Flat Fender Rope

CHOOSE YOUR COLOUR

It is traditional to use rope fenders at the sides of your narrowboat, but many people are concerned that their round fenders take up too much space, especially in locks.

For this reason we have developed these flat rope fenders. In the picture the black one is as you would see it on your boat, whilst the natural one shows the thin section when viewed side on.

Available in three colours to match the ropes and main fenders.

Only available for the Canal Shop

Mooring Hooks

Increasingly boaters are finding steel piling where they want to moor up. These mooring hooks allow you to moor to this piling, avoiding the need for mooring pins and hammers.  The welded hook is the standard version, the ringed hook gives a better rope attachment. The bent bar version is made of stronger steel, avoiding the risk of bending the hook if inconsiderate boaters go past at speed.

Renaissance Fender - Black Poly

This is the standard black Renaissance fender made for us by Brian McGuigan of Renaissance Ropecraft.

These excellent UK made fenders using the traditional technique, but based on a solid moulded rubber core to avoid 'Fender droop' are covered in a long lasting, but economical black polyethylene rope.

These are substantial and long lasting fenders at a good price. The buttons are 12" diameter. We have stock available so you can fit one immediately.

Choose between a button or a V bow fender for the front and a long button or a combined button and tipcat for the rear (or some people can get away with just a button if their rudder doesn't protrude very far). Remember if your fender doesn't reach further than your rudder, it cannot protect it.

Renaissance Fender - Brown Poly

This is the standard brown Renaissance fender made for us by Brian McGuigan of Renaissance Ropecraft.

These excellent UK made fenders using the traditional technique, but based on a solid moulded rubber core to avoid 'Fender droop', are covered in a long lasting, but economical brown polyethylene rope.

These are substantial and long lasting fenders at a good price. The buttons are 12" diameter. We have limited stock available so delivery may take a couple of weeks. If you require some urgently, check with us first for availability.

Choose between a button or a V bow fender for the front and a long button or a combined button and tipcat for the rear (or some people can get away with just a button if their rudder doesn't protrude very far). Remember if your fender doesn't reach further than your rudder, it cannot protect it.